Kantech KT-MOD-CAB Bedienungsanleitung PDF herunterladen

Telephone: 1 (450) 444-2030 • Toll free: 1-888-222-1560 • Fax: 1 (450) 444-2029 • Internet: www.kantech.com

Kantech and the Kantech logo are trademarks of Tyco International Ltd. and its Respective Companies.

KT-MOD-CAB

EXPANSION MODULES CABINET INSTALL SHEET

DN1806-0809

Overview

The KT-MOD-CAB cabinet is an enclosure for the KT-MOD-REL8, the KT-MOD-INP16

and KT-MOD-OUT16 expansion modules. Up to 6 modules can be installed in the

cabinet.

Content

• 698-009K: Black cabinet

• KT-MOD-SPI36: 1 m (3.0 ft) SPI cable assembly with 1 SPI connector

• KT-LOCK: Lock with 2 keys

• DN1805: Cabinet Install Sheet, French version

• DN1806: Cabinet Install Sheet, English version

Related Documentation (each document is enclosed in their corresponding box)

• KT-MOD-REL8: KT-400 Expansion Module 8-Relay with SPI Cable, Install Sheet, DN1786

• KT-MOD-INP16: KT-400 Expansion Module 16-Zone Input with SPI Cable, Install Sheet, DN1776

• KT-MOD-OUT16: KT-400 Expansion Module 16-Output with SPI Cable, Install Sheet, DN1781

Cabinet Description

• Dimensions: 54 cm (21.2 in) High x 29.2 cm (11.5 in) Wide x 7.6 cm (3 in) Deep

• Eight (8) standard knockouts 1.9 cm (0.75 in): 4 on top, 2 at the bottom and 1 on each bottom side

• Two (2) additional openings, 6.3 cm (2.5 in), on the back panel

Installation

1. Insert the nylon standoffs into the back panel of the

cabinet.

Note: Make sure the cabinet is in the upward

position and the tamper switch location is on the

right.

IMPORTANT: Don’t install the expansion modules

before checking their locations within the cabinet.

Trying to pull out the module from its standoffs

would damage it.

2. Secure the cabinet to the wall in the desired

location. Use appropriate wall anchors when

securing the cabinet to drywall, plaster, concrete,

brick or other surfaces.

3. Mount the expansion modules on their standoffs.

IMPORTANT: Make sure the modules terminal

blocks are positioned towards the center of the

cabinet.

4. Run the 91 cm (36 in) SPI cable, provided with the

cabinet, from the KT-400 controller or expansion

modules cabinet, through one of the knockouts, to

the 1

module in the new cabinet.

1 2

KT-MOD-CAB 1

Inhaltsverzeichnis

Seite 1 - KT-MOD-CAB

Seite 2

Kommentare zu diesen Handbüchern

Keine Kommentare

Kantech KT-MOD-CAB Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für elektrische Kantech KT-MOD-CAB herunter. Kantech KT-MOD-CAB User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für elektrische Kantech KT-MOD-CAB